Installazione Raspberry Pi

cd /boot
touch ssh # per abilitare SSH
sudo raspi-config # per entrare nel tool di configurazione

# Elenco delle schede SD montate
sudo fdisk -l

# Installazione scheda SD
sudo dd bs=4M if=raspbian-stretch.img of=/dev/sdb status=progress conv=fsync

# Backup scheda SD
sudo dd bs=4M if=/dev/sdb of=image-`date +%Y%m%d`.img status=progress

# Create a smaller image of the SD...
sudo dd bs=4M status=progress if=/dev/sdb | gzip > image-`date +%Y%m%d`.gz

# ...and restore it
sudo gzip -dc image.gz | dd bs=4M of=/dev/sdb status=progress

Motare un file img

fdisk -l /path/to/image

Mostra:

Disk Stick.img: 3984 MB, 3984588800 bytes
249 heads, 6 sectors/track, 5209 cylinders, total 7782400 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0004bfaa

   Device Boot      Start         End      Blocks   Id  System
Stick.img1   *         128     8015999     4007936    b  W95 FAT32

So I have a block-size of 512 bytes and the start-block is 128. The offset is 512 * 128 = 65536. So the mount command would be

Code:

mount -o loop,offset=65536 Stick.img /mnt/tmp